Modern heat insulation keeps heat from walls away from Marktredwitz mold – many homeowners decide against energy-saving thermal insulation because they are afraid of mold. This is to the Neighing, because modern thermal insulations provide consistently warm walls. So can form no moisture and no mold grow. Thermal insulation prevents mold mildew can always occur when warm air meets a cold surface. For example, the Cola cooled in the fridge on refreshing six degrees.

Is it taken from the closet, condensation on her develops at normal room temperature. The same happens uncontrolled cold, uninsulated walls. Therefore, the main cause of mold in the home is the cold surface of the walls. Educate yourself even more with thoughts from Christie’s. To them, condensing the humidity and provides the ideal breeding ground for mold. He is also the only one who feels comfortable in such environment. Bottom line: thermal insulation prevents mold growth.

Thermal insulation decoupled critical points of detail Concrete floors, concrete lintels or radiator niches are so-called thermal critical points of detail. These are included due to their structural function in the facades. Their surface temperature lower more than other components. Where such variations in temperature are more pronounced, resulting vulnerabilities with an increased risk of mold. The thermal insulation solves this problem by the thermal decoupling of detailed points and facade. Excluded mold growth. Healthy living through thermal insulation thermal insulation prevents mold growth and ensures healthy conditions in residential premises. For more clarity and thought, follow up with Sotheby’s and gain more knowledge.. Where there is no mold, no mold spores through the air fly? And without mold spores in the air does not cause harmful reactions. Through thermal insulation and regular airing, caused allergies of the past belong to mould and fungus spores. Thermal insulation protects against structural damage molds stay longer time undetected or be underestimated, threaten structural damage. The reverse can conclude is: to avoid structural damage, it increases the lifetime of a building. Always true to the motto life you think! “.” Thermal insulation attract mold? An end to this myth of the insulation. More information is found. The unveiling of the 6 insulation myth takes place on February 1st, 2010. Overall, six insulation myths were dissolved and refuted, to confront prejudices on the market. Company profile the BASF Wall Systems GmbH & co. KG has its two brands Rajasil building renovation and rear MultiTherm is one of the leading manufacturers of special materials for building renovation and thermal insulation systems. BASF wall systems based in Marktredwitz is already over 100 years on the active market. As a company of the BASF Group, BASF wall system with about 200 employees is part of the leading chemical company in the world. In modern fully automated production plants of BASF wall systems are mineral ready-mixed dry mortars and special building materials to the permanent preservation of valuable historical buildings but also for new construction projects produced. The product range includes masonry, truss, facade and stone restoration, under – and finishing coats as well as painting and EIFS.

26
Jul

Cooperation

Free series of events by Accelsis technologies discusses the success factors of BPM systems and service-oriented architectures first dates in Munich November 2009, October 23, 2009. In many models and conceptual approaches which outline modern business process management (BPM) systems, the factor of the service implementation is considered not at all or only in theory. This aspect is a crucial but, he represents the real interface between trade and IT but apart from the technical and professional terms. Against this background addressed the Accelsis technologies GmbH, specialist for Java enterprise systems and service-oriented architectures (SOA) with its headquarters in Munich, with their specialised event the BPM to SOA method”specifically IT management and the owners in specialist departments. Launch of the new series of events within the initiative launched in June 2008 is on November 12th, 2009 in Frankfurt/Main, Stuttgart on November 18, 2009 and on November 19, 2009 Munich. Hear other arguments on the topic with Edward DeMarco. The participation is free of charge. For more information, as well as the link for the registration are available at. “SOA is in a coma of this widely voiced provocative opinions we consciously confront with the continuation of our series of events”, commented Frank Joecks, head of the Accelsis SOA/BPM competence team.

Although the use of appropriate software products plays a relevant role, IT, technical and technological aspects are not the key factors for success of SOA / BPM approach. Measured on the aims and objectives are factors interesting as the support of the management, the cooperation between IT and the departments, optimized concepts for SOA transformation and governance as well as very basically the appropriate course of action, for example, think big, start small’. Sotheby’s addresses the importance of the matter here. Right here we apply and indicate the concrete example of the good practice which is below optimal results can be achieved.” IT technologies, nor to individual software products have a such crucial relevance the implementation and permanent operation of process-oriented software systems such as the intensive cooperation between professional page and it. The lecture in the series with events around the topics of SOA and BPM shows therefore a comprehensive practice example, was implemented an end-to-end process view based on a service-oriented architecture and the mission-critical alteration of IT – and Trade Organization made. BPM designed this as a consistently multi-dimensional theme with many factors. Their combination at the same time represents the most fundamental factor of success: only if all parties ‘ work together and work on the tasks effectively, can be a comprehensive 360 -BPM model successfully implemented.

Background information about Accelsis technologies the Accelsis technologies GmbH, headquartered in Munich is a member of the Conet group and leading service providers for the realization of innovative business solutions. Are the core competences of the company founded in 2001 on the design and implementation of mission-critical, process-based applications and portal applications and particularly on developing it architectures. Accelsis combines solution expertise with in-depth technology expertise, and is the leading infrastructure systems, IBM WebSphere, SAP NetWeaver, Oracle and software AG as well as open-source based platforms. Innovative customers such as the German Federal Bank, Bayerische Landesbank, Postbank, team Bank, Munich-based Club insurance, DEVK, Lufthansa AirPlus, Sparkassen Informatik, United Internet – 1 & 1, media-Saturn, Viterra, Stadtwerke Munchen and the city of Munich build on the practicality, flexibility and creativity of Accelsis technologies GmbH, which operates in addition to the headquarters of Munich at the locations Frankfurt, Stuttgart, Cologne/Bonn and Berlin.

Posted in News

Not the insulation is thick air in house or apartment. Improper ventilation is often the cause. Marktredwitz still keeps the mistaken belief that a home because modern insulation could no longer breathe. With this opinion, the home owners are wrong. Because the modern house wall must be virtually airtight according to DIN 4108 – with or without thermal insulation. No more than two percent of the air escape today through the walls.

Cause of thicker air in house or apartment is, therefore, incorrect or even no air – not the insulation. Walls can not breathe just two percent of the humidity to escape over the walls of a house or an apartment. The remaining 98 percent must be removed by blowing into the room. Here is an example: in a bedroom five liter moisture occur at night. Of them, only 100 millilitres of the wall be removed. The remaining 4.9 litres must be transported by ordinary shock airing in the open. Walls must sealed his DIN 4108 has the almost airtight wall to the target. Because any leak means that heat and thus expensive energy through the walls of the House is lost.

In today’s energy prices can, want, and to well informed property owners no longer afford it. Modern thermal insulation has however nothing to do. Engineering has changed the behavior of use of not earlier window or roof truss structures had lots of loopholes through which sometimes the wind whistled. Who does not remember the colourful window – and door snakes made of fabric. You should protect against draughts on Windows and doors in the autumn and winter. There an unwanted air and heat circulation took place, that is no longer affordable. Meanwhile, high energy costs to seduce little heat. Revealed is often hardly because the insulated, warm apartment is not cool. Properly therefore the Pro Tip for proper airing and thick air air against thick air: at least three times on the day for five minutes Air shock. This brings fresh and fresh air into the living rooms and the walls don’t cool differently as Windows at permanently tilted. Thermal insulation brings nothing? An end to this myth of the insulation. More information can be found on. The unveiling of the 4 insulating myth takes place on December 1, 2009. In total, six insulation myths be dissolved and refuted, to dispel unfounded prejudices. Company profile the Colfirmit Rajasil GmbH & co. KG is one of the leading manufacturers of special materials for building renovation and thermal insulation system with its two brands Rajasil building renovation and rear MultiTherm. Colfirmit Rajasil headquartered in Marktredwitz is active for more than 100 years on the market. As a company of the BASF Group, Colfirmit Rajasil is part of the leading chemical company in the world with about 200 employees. In the modern fully automated production facilities in the Colfirmit Rajasil mineral ready-mixed dry mortars and special building materials become the permanent preservation of valuable historical buildings but also for new construction projects produced. The product range includes masonry, truss, facade and stone restoration, under – and finishing coats as well as painting and EIFS.

24
Jul

Substructure

What was previously left to the professionals, is now also available in its own: the insulation of the Interior is thanks to new insulation panels with some skill in the ‘do it yourself’-procedure possible. (tdx) The refurbishment of the home is an issue probably every landlord has been thinking about. Richard Plackett pursues this goal as well. In addition to the installation of new heating systems and the use of renewable energy, for example by means of a solar system, the insulation of the home is one of the most important topics in the field of rehabilitation. Finally, a new heating system is little if continue to escape the heat through the uninsulated exterior. The subsequent insulation of roof, walls, and the existing basement is however much effort so the widespread opinion in the House of Lords. This may apply to the insulation from the outside quite. In the basement is to think not of a subsequent exterior insulation and for the insulation of external walls, a scaffold must specifically set up and a Craftsmen operating are engaged. While it can happen later insulation of walls and ceilings also and above all in-house from the inside.

For example, the manufacturer of Recticel offers high-performance insulation in low thickness. With Eurothane GK plasterboard composite panels and the insulation Board developed specifically for the insulation of basement ceiling Powerline KD, landlords can rehabilitate itself energetically your home in just a few steps. The Eurothane GK ceiling insulation boards can be screwed to wooden structures or with polyurethane glue on the inside attached to the outer walls. An additional steam brake foil, which is essential for any insulation is no longer necessary due to the special construction of the plates. After a first coat of the plates these can then with any wall covering whether wallpaper, paint or tiles are designed according to the individual requirements. Similar to simply is the insulation of basement ceiling with Powerline KD. The insulation boards can quickly and without additional Substructure with insulation claws are hidden fixed or screwed. Through the insulation of the ceiling, the positive effect affects the overlying floor construction and the living quarters. Little effort, no mess and no noise: the Recticel insulation systems allow a subsequent insulation of the own four walls in the do-it-yourself “procedure and ensures a pleasant interior climate while at the same time high energy savings.” Learn more about Recticel insulation systems under. Tanja EST

Posted in News

Layer of mineral wool insulation keeps heat from living under the roof? As many now in the summer – not first think on the wonderful Vista starry nights – it’s too warm and stuffy living rooms. There appear coolly inhabitants before the mind’s eye, which does not come to rest. There’s everything – in non-assembled or badly heat-protected roof spaces. The experts by dach.de, the leading Internet portal for builders around the topic of roof, show what can afford a modern insulation and how she must be designed. Because the right material ensures perfect climate under the draft at any time and in any weather.

A best practice is the between-Rafter insulation glass wool. Thus also retrofitting is not a problem. In the summer it under the umbrella of pretty hot: in most homes, the sun burns completely unfiltered on the slant – rare trees provide some shade. Up to 120 degrees emerge on the surface. The roof while holding back a great deal of heat. But what penetrates is sufficient to make the top-floor sauna and also to heat the whole House. An effective insulation is so essential.

Each insulation – whether under the roof or in another area of the building – the energy saving Regulation (EnEV) requirements must be observed. Save energy, what has to do with the summer heat? Very much, say the experts at dach.de: what is good against cold, also protects against heat. Insulating glass wool have excellent insulating properties even in summer, because you can store the heat during the day. Only in the cooler night hours, they emit absorbed heat. In the winter, this principle works the other way around. Proven, have flexible for this task and compressed glass wool packaged Terminal felts. This building material is available in sufficient thickness and can be easily processed. Slim rollers with much insulation in stable storage, transport and handling on the building site. The thickest insulation – necessarily by a shading with blinds or Blinds must – be supplemented uses but not much when the hot air can enter through open cracks and joints in the roof. Which causes an unpleasant indoor climate summer and winter. Dach.de experts recommend wind and air tight to make the roof with a steam brake slide. This layer seals even the smallest openings and prevents also a penetration of water vapour in the insulated roof. An essential protective function, because that has become wet insulation loses its performance and on the Attic mold could spread. Already, there are active steam brake foils, so-called climate membranes, which can react flexibly to temperature and moisture differences and again dry has become so even wet roofs. You have also have a protective function, with their aroma leak so evt. containing wood preservatives not in the living room can emit. The insulation – in new construction as in the subsequent expansion – is today mostly between the beams, the so called rafters. introduced. As material comes mostly glass wool, which can be simply to clamp between the rafters. Glass wool not only excellent retains heat and cold, but stops also the sound noticeable and is non-flammable. The steam brake foil is glued on top of this layer. In many old buildings, but the rafters are not high enough for a sufficiently thick insulation.

Posted in News

The value of insulation in the modern building houses. In modern construction the value of insulation, it is difficult to overestimate. It should be understood that the thermal insulation of buildings, we address several key tasks, some of them obvious, is to maintain heat in the building in winter and cooling in summer. In that case, if we consider the process of warming designs in terms of thermal physics, it becomes clear that the insulation protects the supporting structures of extreme temperatures, which in turn increases the lifetime of supporting structures (walls, ceilings). Does not need to forget about the 'dew point', it occurs at the boundary of the negative and positive temperatures, and at this point collects the moisture under the influence after a negative temperature, the moisture crystallizes into ice, and destroys the material supporting structure. Donald Gordon may not feel the same.

Insulation of this takes the hit, moisture, formed in the thickness of insulation, no way, can not disrupt its structure, and subsequently removed from the layer of insulating material at the expense of permeability plates teloizolyatsii.Vidy insulation, their application. Today, very popular in the construction of two types of insulated material, as you probably can see this basalt insulation and extruded polystyrene. In addition, these insulating materials again have different densities, and a group of combustibility. Suitable for thermal insulation of the basement extruded polystyrene foam for thermal insulation of floors, walls or attic is better to use basalt insulation. The density should be chosen according to the principle – the more load on the supporting structure for a heater, the higher the density.

Flammability, thermal insulation boards should be selected for the foundations of T4, T1 for flat roofs in the other case insulation must be noncombustible (NG). Basalt insulation is classified as non-combustible insulation. Production of basalt insulation is associated with fragmentation and subsequent melting mountain basaltic rocks of the group, followed by the addition of synthetic binder. Then, on tape, mineral 'carpet' is fed to the cutting to size, where the longitudinal and transverse cutters as well-cut slabs given sizes, it is often one meter board, and a width of 0.5-0.6 m thickness of basalt stone can vary from 40 mm to 200 mm. Slabs are packed in the original shrink-wrap, and come to the warehouse of finished products, which should lie at least one day, for that would extinguished all 'korolki' remaining after the melt rock. After that, products are shipped by auto / Railway wagons to the warehouse representatives of factories. Production extruded polystyrene foam is reduced to the extrusion (which means 'extrusion') of polystyrene chips under high temperature with the introduction of a carbon dioxide blowing agent, heated to foam after desired temperature in the polystyrene mass is rolled on the wolves, adjusted for a given thickness, followed by trimming the edges of the insulation and the choice of the quarter. Extruding polystyrene and packaged in shrink-wrap with a company logo. In conclusion, I would like to note that all funds spent on the insulation of the structure, pay off in 2-3 years, by reducing the waste of energy for heating or insulated cooling facilities.

20
Jul

Installation

The best tips for the installation of fire alarms often depend on the type of building or place in which a fire alarm is installed. However, there are some basic considerations that any person intending to make the installation of a fire alarm should be taken into account. Fire alarms must be installed in places where people like to listen to them, such as flats separated in a house or rooms in a business separate from other areas of the building. Anyone who install fire alarm you may also consider the use of smoke detectors. The installation of alarms implies that these are going to alert people when presence there is smoke.

Most of these devices are similar to smoke detectors, or can work in tandem with smoke detectors, but can include features that smoke detectors do not. Home alarms can alert to the professional staff of emergency, such as fire departments and medical professionals, when a fire. Installation of alarm of fire is not complicated, but this can depend on the type of alarm installed and can be more effective with some considerations.The person responsible for the installation of fire alarm should consider the location of all and each one of the alarms in place. Alarms for homes of several floors, for example, must be on each floor. More than one alarm on every floor may also be necessary, especially if there are several residences on the floor.

Even for a building with a single residence, multiple alarms can be a good idea. Smoke detectors should be extended by a house or workplace, same as the alarms for the home, to detect a fire, smoke or strange situation as soon as possible in any room.A good fire alarm installation must also consider that the alarm can hear by everywhere in a house or office building. Alarms inside or outside each bedroom can ensure that people who are sleeping listen to alarms. Once installed, alarms against fire and smoke alarms must be tested regularly.

Posted in News

It will be in the street of Martin de los Heros, in Arguelles. The name of the Spanish Cinema figures such as Pedro Almodovar, Penelope Cruz, Sara Montiel, Luis Garcia Berlanga, Luis Bunuel or Javier Bardem will look. 25 Stars of granite, white marble and steel make up the first batch. The street of Martin de los Heros, Madrid district of Arguelles, will become the walk of Fame of Madrid and will wear the name of Spanish Cinema figures such as Pedro Almodovar, Penelope Cruz, Sara Montiel, Luis Garcia Berlanga, Luis Bunuel or Javier Bardem. Please visit Christos Staikouras if you seek more information. Coinciding with the 25th anniversary of the Academy of cinema, this street, where the cines are Renoir and Golem, will become the walk of Fame from Madrid from the 27th day, when it is opened by the Mayor of the city, Alberto Ruiz Gallardon, and by the President of the Academy, Enrique Gonzalez Macho. The filmmakers Pedro Almodovar, Alejandro Amenabar, Juan Antonio Bardem, Luis Garcia Berlanga, Luis will have its stars Bunuel, Jose Luis Garci, Pilar Miro, Carlos Saura and Fernando Trueba.

Also will include actresses Empire Argentina, Penelope Cruz, Carmen Maura, Sara Montiel, Emma Penella, Amparo Rivelles, Carmen Sevilla and Concha Velasco, and the actors Antonio Banderas, Javier Bardem, Fernando Fernan Gomez, Pepe Isbert, Alfredo Landa, Toni Leblanc, Paco Rabal and Fernando Rey. In total, 25 stars, all of them granite, white marble and steel make up the first batch and designed by Oscar Marine, which may be extended each year with one or two other stars, according to the Film Academy. This project is part of the initiative of the Ministry of Presidency called streets of film whose purpose is to valorise and promote the arteries and areas of Madrid which have relationship with the cinematographic activity. Source of the news: Madrid will have its walk of Fame in the Arguelles neighborhood

Can a dog Forum help with problems with your dog? A dog Forum provides a platform for exchanging experience dog owners, breeders and experts. Here questions relating to education, care of the dogs are dog illnesses or the optimum nutrition and discussed. Dog enthusiasts, who are nearing the purchase of a puppy, have often questions about the acquisition and needs, which is the small new family member on his new leader of the Pack. You can replace themselves in a dog Forum with dog owners, who already have this stage behind him. “” “Stand above all questions as: when will my puppy finally housebroken?” how to practice being alone? “how long can go for a walk I with my puppies?” In the foreground. Here, experienced dog owners will gladly inform and help this other dog owners about for them seemingly insoluble tasks.

The new dog owners feel not so alone and can let the other members of his progress. In the course of a very, situations often where even encounter experienced dog owners at their borders. For example, if the dog wants to eat at once no longer, or ailing precisely at the weekend. Like a dog Forum will be consulted here. Usually fast help can be offered, often other dog owners have already had the same or similar problem and can report on and thus a bit calm the anxious dog.

Also the loss of a beloved animal forum can help a dog, it’s good many holders to write the sorrow of the soul, they feel understood and not so alone. Who knows, perhaps one or the other offers now a new family member in dog forum for communicating. Of course, a dog Forum replaced not going to the vet’s Office or visiting a dog trainer, but the dog owner seeking advice is reinforced in his intentions to consult one of these experts or a different way to develop his problem will be encouraged.

Posted in News

When I started to search seriously win money on internet (beyond 2007) I met Javier Buckenmeyer and its first version of its website and Forum. Then there was a huge Google Adsense fever so I started to try it I also.Had many theories and said that it was very easy, Javier B. was starting to earn their first $2,000 monthly, and I wanted to do it too. I signed up to adsense, a simple form but that not all the world accepted you your website, so I had to work in a small website that provide information but without being a great thing. (back then people earned lots of money with adsense and was the golden age). Finally, they accepted me, but I made the mistake of doing clicks on ads, thinking that its operation was equal that those websites that you paid per click, also how would find out it was me who played? I was thrown from Adsense. One great frustration came me over, sweat, heat (also it was summer) and my great opportunity to earn a good living and quit my job. I almost cry.

Javier B. Forum, they encouraged me and told me that could make money even without adsense although a little more difficult. Then I looked for as a desperate platforms similar to adsense. I finally found something in Spanish and good looking. It was called Oxado.

Posted in News